Success with primitive GoTo

Reviews and questions about new and old equipment.
Share with us your latest purchase or discuss equipment that you are currently using
Post Reply
User avatar
rwilkinson
Member
Posts: 1297
Joined: Mon Oct 12, 2009 6:47 pm
Location: Bolton
Contact:

Success with primitive GoTo

Post by rwilkinson » Sat Feb 25, 2012 9:01 am

I've just been experimenting with a Tasco GuideStar alt-az mount: a 10-year-old GoTo system. This is a re-badged version of an early Celestron NexStar (the non-upgradable GT model, with a number of well-known bugs!).
This model was obviously sold in the US market (the pre-loaded city database and time-zones are all in the USA), but I managed to work out how to enter my lat/long co-ordinates and time-zone.

Last night I fitted my little 80mm f/5 refractor onto it to give it a try. The only alignment option on this model is "Auto" (2-star) and after a couple of false-starts. it got quite close to its first star: Sirius.
Then it chose Rigel as its second alignment star, and was then able to GoTo M42 OK. But with two alignment stars so close, I anticipated that its calibration wouldn't be much good for the whole sky; and indeed it missed Jupiter by a few degrees. :(
So then I repeated the Auto-Align, but after lining up on Sirius as the first star, I kept skipping though its choices of second star until it got to Mirfak (in Perseus). And I made sure that my final centring of the alignment stars was done with the Down and Right buttons, to remove the effects of backlash in the gears. Using this calibration I was most impressed with its performance: it went straight onto M42, M31, Jupiter, M45 and even M1. Finally I called up Mars (which was behind the trees at the time) and left it tracking - sure enough, 20 minutes later I had another look and saw Mars emerging from behind a branch, centred in the eyepiece! :D

So the moral of this story is - make sensible choices for alignment stars - particularly if you only use two!

User avatar
rwilkinson
Member
Posts: 1297
Joined: Mon Oct 12, 2009 6:47 pm
Location: Bolton
Contact:

Re: Success with primitive GoTo

Post by rwilkinson » Sun Oct 06, 2013 7:17 am

I've just got this old mount back from Sharples, and have adapted it to run my Go-To Binoculars:
Image

I tried it out last night, and having Aligned on Vega and Mirfak it was able to GoTo M31, the Double Cluster, M13 and M92. I tried it on M27 but it was too hazy (and I'd forgotten to fit the dew-caps so my objectives were misting over by then).

User avatar
bbones
Member
Posts: 370
Joined: Mon Mar 12, 2012 7:26 pm
Location: Horwich

Re: Success with primitive GoTo

Post by bbones » Sun Oct 06, 2013 9:03 pm

Nice piece of work Ross, the lawn looks good as well.

how did you get the head to fit on the tripod?

User avatar
rwilkinson
Member
Posts: 1297
Joined: Mon Oct 12, 2009 6:47 pm
Location: Bolton
Contact:

Re: Success with primitive GoTo

Post by rwilkinson » Mon Oct 07, 2013 7:48 am

bbones wrote:how did you get the head to fit on the tripod?
I've posted the answer in the original thread: viewtopic.php?f=5&t=351&p=2342#p2342

User avatar
rwilkinson
Member
Posts: 1297
Joined: Mon Oct 12, 2009 6:47 pm
Location: Bolton
Contact:

Re: Success with primitive GoTo

Post by rwilkinson » Fri Oct 11, 2013 9:23 am

rwilkinson wrote:I tried it on M27 but it was too hazy
It was much clearer on Wednesday night, so with my 15x70 binoculars on this mount I was quickly able to find the Dumb-bell and M81 & 82.

Post Reply